FWBlockAccessBinaryChangedDesc=%s binary changed, as a result PC Tools Firewall Plus blocked it when it tried to access the physical memory.
FWCannotDeleteNetworkProfile=This profile is associated with a network (%s). It cannot be deleted.
FWChangeDesktopDesc=%s is attempting to change an important desktop setting.
FWChangeIEStartPageDesc=%s is attempting to change an important Internet Explorer setting.
FWChangePhysicalMemoryDesc=%s is attempting to change the contents of physical memory.
FWChildConnectDesc=%s is attempting to access the internet by using %s.
FWCommandFailed=Command failed, please contact support for more information
FWCommsAccessDenied=Application (%s) return access denied for message (%s)
FWCommsOverload=Application (%s) return server overload error for message (%s)
FWCommsSendError=Error (%s) while sending message to application (%s)
FWCommsSendMsg=Could not create communication channel with application (%s)
FWCommsSrvDown=Application (%s) is down or unavailable
FWCommsTimeout=Sending message (%s) to application (%s) timed out
FWCommsUnexp=Application (%s) had unspecified error
FWCreateFileTaskDesc=%s is attempting to create a system task (%s).
FWCreateMessage=Could not create message object for message ID (%s)
FWCreateRemoteThreadDesc=%s is trying to remotely create a thread in %s.
FWDAYTIMEProtocol= DAYTIME protocol. (TCP/UDP)
FWDDEInitiateDesc=%s is attempting to control another network-enabled application %s using Dynamic Data Exchange (DDE).
FWDNSDNS= DNS (Domain Name System). (TCP/UDP)
FWDNSResolveDesc=%s is attempting to perform a DNS resolve.
FWDoesNotEqualTo=does not equal %s
FWDriverInitFailed=Failed to initialise firewall drivers, please try to reboot the firewall. If the problem persists please contact PC Tools support.
FWDuplicateObjectDesc=%s is trying to duplicate an object in %s.
FWECHOProtocol= ECHO protocol. (TCP/UDP)
FWElementNotFound=Element (%s) not found
FWEqualTo=equal to %s
FWErrorPopupMessage=Application %s was temporarily allowed when trying to perform the action specified below. If you do not trust this application, choose ΓÇÿBlockΓÇÖ to block further actions done by this application. Otherwise, choose ΓÇÿAllowΓÇÖ. NOTE: Blocking a legitimate application might cause system instability
FWFTP= FTP - File Transfer Protocol. (TCP/UDP)
FWFTPOverTLSSSL= FTP Protocol over TLS/SSL. (TCP/UDP)
FWFailMainDlg=Failed to create main dialogue
FWFailedSignIni=Failed to sign initialisation file (%s)
FWFingerProtocol= Finger protocol. (TCP)
FWForceLogOffDesc=%s is trying to force a log off action.
FWForceShutDownDesc=%s is trying to force a system shutdown.
FWForwardingRuleDesc=Process internal rules (needed for auto rule creation)
FWForwardingRuleName=Internal Rule
FWFuncFailed=Function (%s) failed, error (%s)
FWGUI_1221=Smart Update
FWGUI_1222=Bytes
FWGUI_1223=Firewall is on Allow all mode.#\#r#\#nAlthough firewall is enabled, it allows all incoming and outgoing connections.
FWGUI_1224=Firewall Mode
FWGUI_1225=Allow All
FWGUI_1226=Ask
FWGUI_1227=Block All
FWGUI_1228=NOTE: If both filtering options are not ticked, firewall protection is disabled.
FWGUI_1287=installed
FWGUI_1288=not installled
FWGUI_1305=Initialising application...
FWGUI_1306=PC Tools Firewall Plus
FWGUI_1307=Minimise
FWGUI_1308=Maximise
FWGUI_1309=Close
FWGUI_1310=Restore
FWGUI_1311=Status
FWGUI_1312=Update now
FWGUI_1313=Update in
FWGUI_1314=day(s)
FWGUI_1315=Upgrade Now
FWGUI_1316=Register...
FWGUI_1317=Displays Firewall Status and version information
FWGUI_1318=Allowed/Blocked Applications list
FWGUI_1319=Create and manage advanced firewall rules for individual profiles
FWGUI_1320=Log of network traffic and firewall activity
FWGUI_1321=Configure Firewall Plus Settings
FWGUI_1322=Upgrade your security using PC Tools Security products
FWGUI_1323=Help
FWGUI_1324=Help
FWGUI_1325=Smart Update
FWGUI_1326=You must restart your computer for the updates to take effect. Click Yes to restart now or No if you intend to restart later.
FWGUI_1327=PC Tools Firewall Plus Information
FWGUI_1328=New drivers have been updated by Smart Update. Installing drivers now. Please wait...
FWGUI_1329=The PC Tools Firewall Plus driver installation failed. Please contact PC Tools support.
FWGUI_1330=Enable Packet filtering
FWGUI_1331=User is not an administrator. Smart Update will download all updates without interacting with the user.#\#r#\#n#\#r#\#nWould you like to run Smart Update anyway?
FWGUI_1332=Smart Update completed successfully
FWGUI_1333=Smart Update did not find new updates
FWGUI_1334=Smart Update failed, error: %s
FWGUI_1335=Product Version
FWGUI_1336=Version is current
FWGUI_1337=Version is not current
FWGUI_1338=Last Update was today
FWGUI_1339=Smart Update never run
FWGUI_1340=Last update was yesterday
FWGUI_1341=Free Edition
FWGUI_1342=Upgrade now
FWGUI_1343=Error downloading the list of updates. Please try again later.
FWGUI_1344=No Internet connection found.
FWGUI_1345=Your subscription has expired. Please renew your subscription to continue receiving updates.
FWGUI_1346=The subscription status is invalid. Please contact support.
FWGUI_1382=Warning: this computer program is protected by copyright law and international treaties.
FWGUI_1384=PC Tools Firewall Plus Error
FWGUI_1385=Firewall Protection is
FWGUI_1387=About...
FWGUI_1390=Filtering is partially active
FWGUI_1393=System Information
FWGUI_1394=About
FWGUI_1395=Details
FWGUI_1396=Item
FWGUI_1397=Value
FWGUI_1398=General
FWGUI_1399=Smart Update
FWGUI_1401=To upgrade to the licenced version, click Register Online or click Continue to proceed with the trial version. Registered users, please enter your registration and licence details below to activate the licenced version.
FWGUI_1402=License Name
FWGUI_1403=License Code
FWGUI_1404=Register Online
FWGUI_1405=Continue
FWGUI_1406=OK
FWGUI_1407=Copyright © 2006-2009 PC Tools. All rights reserved.
FWGUI_1408=Version
FWGUI_1409=Registered to:
FWGUI_1410=Warning: this computer program is protected by copyright law and international treaties. Unauthorised reproduction or distribution may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
FWGUI_1411=Register Now
FWGUI_1412=The registration information you entered is not correct. Click 'OK' and try again or click 'Cancel' to continue using PC Tools Firewall Plus
FWGUI_1413=You have successfully registered PC Tools Firewall Plus
FWGUI_1414=Register
FWGUI_1415=Removable Drive
FWGUI_1416=Local Drive
FWGUI_1417=Network Drive
FWGUI_1418=DVD/CD-RW Drive
FWGUI_1419=Floppy Drive
FWGUI_1420=Protect your PC in real-time against attack
FWGUI_1459=New updates are available. Would you like to run Smart Update now?
FWGUI_1460=Operating System
FWGUI_1461=Number of Processors
FWGUI_1462=Computer Name
FWGUI_1463=Logged in as
FWGUI_1464=Total Physical Memory
FWGUI_1465=Available Physical Memory
FWGUI_1466=Memory Utilisation
FWGUI_1467=Drives
FWGUI_1468=Unregistered
FWGUI_1469=Never
FWGUI_1470=Subscription status:
FWGUI_1472=Registered
FWGUI_1473=Last Smart Update:
FWGUI_1474=Firewall Protection is
FWGUI_1476=Data Sent:
FWGUI_1489=Quick Start Guide
FWGUI_1490=PC Tools Homepage
FWGUI_1491=Disable Firewall
FWGUI_1492=Enable Firewall
FWGUI_1493=Exit
FWGUI_1494=Open
FWGUI_1496=Data Received:
FWGUI_1501=Application Blocking
FWGUI_1502=Click here to manage applications
FWGUI_1503=Profiles
FWGUI_1504=Click here to manage profiles
FWGUI_1505=Select an action
FWGUI_1506=Status & Summary
FWGUI_1507=ON
FWGUI_1508=OFF
FWGUI_1509=Action
FWGUI_1510=Invalid
FWGUI_1511=Unknown
FWGUI_1512=RAM Disk
FWGUI_1513=Application Filtering is disabled#\#r#\#nPlease activate Application Filtering in settings page to get the complete protection for your computer.
FWGUI_1514=Packet Filtering is disabled#\#r#\#nPlease activate Packet Filtering in settings page to get the complete protection for your computer.
FWGUI_1515=The PC Tools Firewall Plus service has not been started. Please wait while this service is automatically started. This may take a couple of minutes...
FWGUI_1516=The PC Tools Firewall Plus service has failed to start. Unable to run the PC Tools Firewall Plus product. Please contact your administrator.
FWGUI_1517=The firewall service does not exist on this computer. Please reinstall the PC Tools Firewall Plus product and try again.
FWGUI_1518=PC Tools Firewall Plus failed to enable. This means you are unprotected from external networks. Please contact your administrator.
FWGUI_1519=PC Tools Firewall Plus failed to disable. Please contact your administrator.
FWGUI_1521=You are about to shutdown PC Tools Firewall Plus. This means your computer will be no longer protected from the Internet.#\#r#\#n#\#r#\#nAre you sure you wish to exit?
FWGUI_1523=The firewall plug-in DLL failed to load. Reinstallation of the PC Tools Firewall Plus product may solve this problem, otherwise contact PC Tools.
FWGUI_1524=Activity
FWGUI_1525=A problem occured when attempting connection to the 'PC Tools Firewall Plus' service. The application will now terminate. Please try restarting the application.#\#r#\#n#\#r#\#nIf the problem continues, please contact PC Tools support.
FWGUI_1526=Click here for detailed traffic activity
FWGUI_1527=A problem occured when attempting to change the Smart Update language. Please contact PC Tools support if this failure continues.
FWGUI_1528=PC Tools Firewall Plus Smart Update Information
FWGUI_1529=Last Smart Update Check:
FWGUI_1531=Register PC Tools Firewall Plus
FWGUI_1532=Please wait while attempting to stop PC Tools Firewall Plus service...
FWGUI_1533=The PC Tools Firewall Plus service has failed to stop. Please contact your administrator.
FWGUI_1534=Detailed traffic activity based on all system network adapters
FWGUI_1535=Failed to enable Application filtering.
FWGUI_1536=Failed to enable Packet filtering.
FWGUI_1537=PC Tools Firewall Plus is currently disabled. It is advised that you enable the firewall.#\#r#\#n#\#r#\#nNOTE: If both filtering options are not ticked, firewall protection is disabled.
FWGUI_1538=PC Tools Firewall Plus Warning
FWGUI_1539=Enable Application filtering
FWGnutella= Gnutella. (TCP)
FWGopherProtocol= Gopher protocol. (TCP)
FWHTTP= HTTP - used for transferring web pages. (TCP)
FWHTTPAlternate= HTTP Alternate (http-alt). (TCP)
FWHTTPDefaultPortSquidPxy= HTTP default port for the Squid proxy. (TCP)
FWHTTPSHTTPOverSSL= HTTPS - HTTP over SSL. (TCP/UDP)
FWHandleNotReg=No handler is registered for message %s
FWHomeProfile=Home
FWHostNameServer= Host Name Server. (TCP/UDP)
FWIBMLNDominoRPC= IBM Lotus Notes/Domino RPC. (TCP)
FWICQAOLInstantMessenger= ICQ and AOL Instant Messenger. (TCP)
FWIMAP4= IMAP4 - used for retrieving E-mails. (TCP/UDP)
FWPLG_140=Automatically allow applications with valid Digital Signatures
FWPLG_141=Change Password
FWPLG_142=Activate/Deactivate rule
FWPLG_143=Password Protection
FWPLG_144=Allows you to set a password to protect critical areas of Firewall Plus.
FWPLG_145=U/D
FWPLG_146=Date
FWPLG_147=Rule
FWPLG_148=Type
FWPLG_149=Source/Destination
FWPLG_150=Additional
FWPLG_151=Password Protection Settings
FWPLG_152=Enable Password Protection
FWPLG_153=Confirm Action
FWPLG_154=Protect Settings
FWPLG_155=Import ...
FWPLG_156=Network Settings
FWPLG_157=IPv4 or IPv6
FWPLG_158=IP6 over IP4
FWPLG_159=General options:
FWPLG_160=Display traffic information in tray icon
FWPLG_161=Application filtering enabled
FWPLG_162=Protect Shutdown
FWPLG_163=Packet filtering enabled
FWPLG_164=Auto Refresh
FWPLG_165=Outbound
FWPLG_166=Inbound
FWPLG_167=0 : Echo Reply
FWPLG_168=3 : Destination Unreachable
FWPLG_169=0 : net unreachable
FWPLG_170=1 : host unreachable
FWPLG_171=2 : protocol unreachable
FWPLG_172=3 : port unreachable
FWPLG_173=4 : fragmentation needed and DF set
FWPLG_174=5 : source route failed
FWPLG_175=4 : Source Quench
FWPLG_176=5 : Redirect
FWPLG_177=8 : Echo
FWPLG_178=9 : Router advertisement
FWPLG_179=10 : Router selection
FWPLG_180=11 : Time Exceeded
FWPLG_181=12 : Parameter Problem
FWPLG_182=13 : Timestamp
FWPLG_183=14 : Timestamp Reply
FWPLG_184=15 : Information Request
FWPLG_185=16 : Information Reply
FWPLG_186=17 : Address Mask Request
FWPLG_187=18 : Address Mask Reply
FWPLG_188=30 : Traceroute
FWPLG_189=31 : Datagram Conversion Error
FWPLG_190=0 : time to live exceeded in transit
FWPLG_191=1 : fragment reassembly time exceeded
FWPLG_192=0 : pointer indicates the error
FWPLG_193=0 : Redirect datagrams for the Network
FWPLG_194=1 : Redirect datagrams for the Host
FWPLG_195=2 : Redirect datagrams for the Type of Service and Network
FWPLG_196=3 : Redirect datagrams for the Type of Service and Host
FWPLG_197= The application is attemting to access the Internet.
FWPLG_198=Protect Uninstall
FWPLG_199=EXE (Executables, *.exe)|*.exe||
FWPLG_200=Application already exists in the list
FWPLG_201=Add Application
FWPLG_202=Allow
FWPLG_203=Block
FWPLG_204=Password
FWPLG_205=Location
FWPLG_206=Application not available
FWPLG_207=Filtering options
FWPLG_208=PC Tools Firewall
FWPLG_209=You have made changes to the advanced rules. Would you like to apply these changes now?
FWPLG_210=All
FWPLG_211=47-GRE
FWPLG_212=ICMP
FWPLG_213=IGMP
FWPLG_214=Other
FWPLG_215=50-SIPP-ESP
FWPLG_216=TCP
FWPLG_217=TCP or UDP
FWPLG_218=UDP
FWPLG_219=Change Protocol
FWPLG_220=Inbound
FWPLG_221=Outbound
FWPLG_222=Change Direction
FWPLG_223=Block
FWPLG_224=Please enter a password.
FWPLG_225=Log
FWPLG_226=stop processing more rules
FWPLG_227=Passwords do not match. Please try again.
FWPLG_228=where the direction is
FWPLG_229=where the local ethernet address is
FWPLG_230=where the remote ethernet is
FWPLG_231=where the ethernet type is
FWPLG_232=where the ICMP code is
FWPLG_233=where the ICMP type is
FWPLG_234=where the local IP is
FWPLG_235=where the local IPv6 is
FWPLG_236=where the local port is
FWPLG_237=where the protocol is
FWPLG_238=where the remote IP is
FWPLG_239=where the remote IPv6 is
FWPLG_240=where the remote port is
FWPLG_241=Change ICMP Type
FWPLG_242=Undefined
FWPLG_243=All
FWPLG_244=Change ICMP Code
FWPLG_245=Change local address
FWPLG_246=Change remote address
FWPLG_247=Equal to my address
FWPLG_248=Different from my address
FWPLG_249=and
FWPLG_250=or
FWPLG_251=Network
FWPLG_252=Mask
FWPLG_253=Change remote IPv6 address
FWPLG_254=Change local IPv6 address
FWPLG_255=Change local port
FWPLG_256=Change remote port
FWPLG_257=Change ethernet type
FWPLG_258=Other
FWPLG_259=on every packet
FWPLG_260=Allow
FWPLG_261=Match Local IP address
FWPLG_262=Match Remote IP address
FWPLG_263=End address must be higher than the start address.
FWPLG_264=Input error
FWPLG_265=Same
FWPLG_266=Different
FWPLG_267=Address
FWPLG_268=Not Mask
FWPLG_269=Equals
FWPLG_270=Equals or
FWPLG_271=Doesn't equal
FWPLG_272=Start
FWPLG_273=End
FWPLG_274=In Range A:B
FWPLG_275=Out Range A:B
FWPLG_276=Match Local TCP or UDP Port
FWPLG_277=Match Remote TCP or UDP Port
FWPLG_278=Does not equal and
FWPLG_279=User defined service
FWPLG_280=Port
FWPLG_281=Match Local IPv6 address
FWPLG_282=Match Remote IPv6 Address
FWPLG_283=Rule should perform either allow or block action
FWPLG_284=No Action
FWPLG_285=Rule logic is invalid. Please modify rule
FWPLG_286=Invalid rule
FWPLG_287=OK
FWPLG_288=Cancel
FWPLG_289=Close
FWPLG_290=What do you want done with the packet?
FWPLG_291=Step 1: Select &action(s)
FWPLG_292=Step 2: Edit the rule &description (click an underlined value)
FWPLG_293=Which condition(s) do you want to check?
FWPLG_294=Step 1: Select &condition(s)
FWPLG_295=Step 2: Edit the rule &description (click an underlined value)
FWPLG_296=Select communication direction
FWPLG_297=Outbound (from your computer to the net)
FWPLG_298=Inbound (from the net to your computer)
FWPLG_299=Direction
FWPLG_300=Select ethernet type
FWPLG_301=Language options:
FWPLG_302=Ethernet Type
FWPLG_303=Finish rule setup.
FWPLG_304=Step 1: Specify a &name for this rule
FWPLG_305=Step 2: describe the purpose of the rule
FWPLG_306=Step 3: Setup rule options
FWPLG_307=This rule is active
FWPLG_308=Step 4: &Review rule (click an underlined value to edit)
FWPLG_309=ICMP Code
FWPLG_310=Set Condition
FWPLG_311=Set Condition
FWPLG_312=ICMP Type
FWPLG_313=Type
FWPLG_314=Match Address
FWPLG_315=Match Range
FWPLG_316=Use Mask
FWPLG_317=Use my Address
FWPLG_318=Condition
FWPLG_319=Sub Type:
FWPLG_320=Please provide valid text for the hint.
FWPLG_321=Failed to change the password.
FWPLG_322=Type
FWPLG_323=Match Address
FWPLG_324=Match Range
FWPLG_325=Use Mask
FWPLG_326=Use my Address
FWPLG_327=Condition
FWPLG_328=Sub Type:
FWPLG_329=ICMP protocols cannot change to other protocols in pop-ups.
FWPLG_330=You are not allowed to change the direction in pop-ups.
FWPLG_331=Example:
FWPLG_332=Select Protocol
FWPLG_333=Create New Rule
FWPLG_334=Select Protocol
FWPLG_335=Services
FWPLG_336=Type
FWPLG_337=Match Port
FWPLG_338=Match Range
FWPLG_339=Condition
FWPLG_340=Sub Type:
FWPLG_341=Start:
FWPLG_342=End:
FWPLG_343=Match TCP or UDP port
FWPLG_344=Next >
FWPLG_345=< Back
FWPLG_346=Finish
FWPLG_347=You cannot remove this condition for inbound directions.
FWPLG_348=N/A
FWPLG_349=Unknown
FWPLG_350=Old Password
FWPLG_351=Port Dest
FWPLG_352=Src
FWPLG_353=Type
FWPLG_354=Code
FWPLG_355=Data
FWPLG_356=Protocol
FWPLG_357=IP Fragment
FWPLG_358=Offset
FWPLG_359=Type Ethernet
FWPLG_360=Application no longer exists at this location
FWPLG_361=Error in applying Password Protectin settings. Settings are restored to last sucessfully modified values.
FWPLG_362=Prompt to confirm changing an application's Allow/Block status
FWPLG_363=Allows you to configure and control certain aspects of the firewall.
FWPLG_364=Automatically allow known applications
FWPLG_365=Allows you to modify the network settings and set the network profiles.
FWPLG_366=Profile
FWPLG_367=IP/Mask
FWPLG_368=Add/Remove Profiles
FWPLG_369=This dialogue allows you to add new profiles based off the existing profiles, and remove the user defined profiles. If you click Add, a new profile will be created and it inherits the rules from the selected profile in the list.
FWPLG_370=Traffic Information
FWPLG_371=Incorrect old password.
FWPLG_372=Packets blocked:
FWPLG_373=Bytes blocked:
FWPLG_374=Total packets:
FWPLG_375=Total bytes:
FWPLG_376=Rule's Name
FWPLG_377=Direction
FWPLG_378=Ethernet
FWPLG_379=Application
FWPLG_380=IP
FWPLG_381=Source Address
FWPLG_382=Destination Address
FWPLG_383=Type
FWPLG_384=Name:
FWPLG_385=Protocol
FWPLG_386=Length
FWPLG_387=Identification
FWPLG_388=DF MF
FWPLG_389=Frag. Offset
FWPLG_390=Time To Live
FWPLG_391=Source Port
FWPLG_392=Destination Port
FWPLG_393=U A P R S F
FWPLG_394=Data
FWPLG_395=ICMP
FWPLG_396=Code
FWPLG_397=Data( 4th to 15th byte)
FWPLG_398=Packet's Content
FWPLG_399=Add Profile
FWPLG_400=Allow all traffic
FWPLG_401=Are you sure you want to change the permission of this application?
FWPLG_402=Yes
FWPLG_403=No
FWPLG_404=Do not show this dialogue again
FWPLG_405=This action cannot be done as the Firewall service is not currently running.
FWPLG_406=Path:
FWPLG_407=Some of the firewall initialization files have been tampered with by an external source. These files have been restored to provide maximum security for your system. You are advised to run an Anti-Spyware product to make sure your system is clean from malware.
FWPLG_408= PC Tools Firewall Plus Information
FWPLG_409=Show Files >>
FWPLG_410=RLS (Rulesets, *.rls)|*.rls||
FWPLG_411=Sent
FWPLG_412=Received
FWPLG_413=Profile Name:
FWPLG_414=Invalid Profile Name
FWPLG_415=A user defined profile with the same name already exists.
FWPLG_416=Profile information not found.
FWPLG_417=This profile is currently selected as the default profile for the new networks. It cannot be deleted.
FWPLG_418=This application is a component of PC Tools Firewall Plus and cannot be added to the list.
FWPLG_492=Shows the current network traffic and firewall activity.
FWPLG_493=Manage the applications that are allowed to access the network.
FWPLG_494=Create and manage advanced firewall rules for individual profiles.
FWPLG_495=Shows the history of network traffic and firewall activity.
FWPLG_496=Use this category to customise general settings, including tray options, white list and filtering options
FWPLG_497=Use this category to set the zone for the available network adapters on your computer. To modify a zone, select the adapter name and change the zone.
FWPLG_498=General Settings
FWPLG_499= Bad Ethernet address format.#\#nExample of correct address : 00:40:ff:ff:80:11#\#nInsert ':' between the 6 hexadecimal numbers ranging between 00 and FF
FWPLG_500=Change local ethernet address
FWPLG_501=Change remote ethernet address
FWPLG_502=Ehernet Address
FWPLG_503=Settings are password protected.
FWPLG_504=Local ethernet address
FWPLG_505=Remote ethernet address
FWPLG_506=Condition
FWPLG_507=Ethernet Address Criteria
FWPLG_508=ICMPv6
FWPLG_509=where the local IP is equal to my address
FWPLG_510=IP4 over IP6
FWPLG_511=U
FWPLG_512=D
FWPLG_513=Customize
FWPLG_514=Enable Logging
FWPLG_515=Disable Logging
FWPLG_516=Change action to Allow
FWPLG_517=Change action to Block
FWPLG_518=Common Tasks
FWPLG_519=TCPV6
FWPLG_520=UDPV6
FWPLG_521=Undo changes
FWPLG_522=Refresh list
FWPLG_523=Selected Rule's Details
FWPLG_524=Change this rule
FWPLG_525=Permissions
FWPLG_526=Select an application in the list to view details ...
FWPLG_527=In Trusted List
FWPLG_528=Not in Trusted List
FWPLG_529=Please enter password to continue.
FWPLG_530=Password Hint
FWPLG_531=Blocked
FWPLG_532=The following files and/or profiles are not compliant with normal user mode. If you proceed, they will change to be compliant, otherwise the user mode will remain expert.
FWPLG_533=Do you want to proceed?
FWPLG_534=Allow Load Drivers
FWPLG_535=Please enter a name
FWPLG_536= You can modify 'Access Physical Memory' setting in the applications view to change permissions.
FWPLG_537=Access Physical Memory
FWPLG_544=This condition cannot be removed from an application's advance rule.
FWPLG_545=Category
FWPLG_546=FQDN Name
FWPLG_547=Step 1 : Setup rule options
FWPLG_548=Step 2: Review rule (click an underlined value to edit)
FWPLG_549=Shutdown is password protected.
FWPLG_550=Uninstall is password protected.
FWPLG_551=Port Settings Error
FWPLG_553=Original port cannot be excluded from the range.
FWPLG_554=Unknown Application
FWPLG_555=Allows you to configure general rules for applications installed on your computer.
FWPLG_556=Prompt for permissions
FWPLG_557=Allows you to configure advanced rules for applications installed on your computer when connecting to the internet/network.
FWPLG_560=Advanced settings
FWPLG_563=Block access
FWPLG_568=where the remote address is
FWPLG_569=Match Remote Address
FWPLG_570=This action is not allowed as it will make the application's #\#r#\#npermission status fully undetermined.
FWPLG_572=Filtering and Packet Settings
FWPLG_573=Allows you to configure Filtering options and advanced packet settings.
FWPLG_574=User Mode
FWPLG_575=Expert user mode enables you to see more detailed information alerts and create custom rules.
FWPLG_576=Normal User
FWPLG_577=Expert User
FWPLG_580=Incorrect password, please try again.
FWPLG_581=All Applications
FWPLG_582=Summary
FWPLG_583=Connections
FWPLG_584=In order for applications to connect to the Internet properly, 'Application Filtering'#\#r#\#nshould be turned on, unless you have defined proper Advanced Rules.#\#r#\#nDisabling this option is not generally recommended.#\#r#\#n#\#r#\#nDo you want to continue?
FWPLG_585=Full Screen
FWPLG_586=Connecting
FWPLG_587=Connected
FWPLG_588=Disconnecting
FWPLG_589=Disconnected
FWPLG_590=Remote Address
FWPLG_591=Status
FWPLG_592=User
FWPLG_596=Connection Details
FWPLG_597=Full Screen Settings
FWPLG_598=Allows you to control the activation of pop-ups in full screen mode
FWPLG_599=Local IP
FWPLG_600=Local Port
FWPLG_601=Remote Port
FWPLG_602=Applications
FWPLG_603=Activity
FWPLG_604=Settings
FWPLG_605=Version
FWPLG_606=Application Filtering
FWPLG_607=Packet Filtering
FWPLG_608=On
FWPLG_609=Off
FWPLG_610=Customize Rule
FWPLG_611=Apply to all connections
FWPLG_612=Enable full screen detection
FWPLG_613=where the packet may be fragmented
FWPLG_614=Original IP address cannot be excluded.#\#r#\#n Please reconfigure your settings to include the original IP address.
FWPLG_615=Failed to import file
FWPLG_616=Export logs...
FWPLG_617=CSV (Comma delimited)(*.csv)|*.csv||
FWPLG_618=Failed to save logs
FWPLG_619=Logs exported successfully
FWPLG_620=Import logs...
FWPLG_621=DAT (log data file)(*.dat)|*.dat||
FWPLG_622=System
FWPLG_623=Apply to all listening events
FWPLG_624=Remote IP
FWPLG_625=Key
FWPLG_626=Value Name
FWPLG_627=The rule already exists.
FWPLG_628=This hook monitors messages before the system sends them to the destination window procedure.
FWPLG_629=This hook monitors messages after they have been processed by the destination window procedure.
FWPLG_630=This hook receives notifications useful to a computer-based training (CBT) application.
FWPLG_631=This hook is useful for debugging other hook procedures.
FWPLG_632=This hook will be called when the application's foreground thread is about to become idle.
FWPLG_633=This hook monitors messages posted to a message queue.
FWPLG_634=This hook posts messages previously recorded by a WH_JOURNALRECORD hook procedure.
FWPLG_635=This hook records input messages posted to the system message queue.
FWPLG_642=This hook monitors messages generated as a result of an input event in a dialogue box, message box, menu, or scroll bar.
FWPLG_643=This hook receives notifications useful to shell applications.
FWPLG_644=This hook monitors messages generated as a result of an input event in a dialogue box, message box, menu, or scroll bar. The hook procedure monitors these messages for all applications in the same desktop as the calling thread.
FWPLG_645=The hook procedure is associated with all existing threads running in the same desktop as the calling thread.
FWPLG_646=Process ID
FWPLG_647=To allow this application to contact the Internet please choose ΓÇÿAllowΓÇÖ otherwise choose ΓÇÿBlockΓÇÖ to restrict it.
FWPLG_648=Allow application to use previous rule only if you know the application is safe.
FWPLG_650=Only Allow this if you know the applications are safe.
FWPLG_651=Only allow this if you know the application is Safe.
FWPLG_653=Listening
FWPLG_654=localhost
FWPLG_655=Any IP
FWPLG_656=Allows you to configure different Firewall settings.
FWPLG_657=MAC Address
FWPLG_658=Network Path
FWPLG_659=History
FWPLG_660=Network Map
FWPLG_662=Please select an Active Application from the list to view detailed information on its activity.
FWPLG_664=Rules in the Advanced Rules list take priority over stealth mode.#\#r#\#nAs stealth mode is currently enabled, this rule might break it.#\#r#\#nDo you wish to proceed?
FWPLG_665=Confirm Password
FWPLG_666=This rule cannot be disabled.#\#r#\#n However, turning off 'Application Filtering' under settings (Filtering tab)#\#r#\#n will cause this rule to become ineffective.
FWPLG_684=Hint
FWPLG_685=Password Hint (Displayed when password required)
FWPLG_690=You cannot uncheck all items when Password Protection is enabled.
FWPLG_691=Failed to set the password.
FWPLG_692=Modify other applications
FWPLG_693=Control other applications
FWPLG_694=Modify and control system
FWPLG_695=Modify system and Applications
FWPLG_696=Service Name
FWPLG_698=Old Image Path
FWPLG_699=New Image Path
FWPLG_700=Registry Path
FWPLG_707=Modify the binary of any other application
FWPLG_708=Send control commands to another application
FWPLG_709=Modify system behaviour
FWPLG_710=Use Microsoft DNS Resolving mechanism
FWPLG_711=Modify or send control commands to the system or to other applications
FWPLG_713=File Name
FWPLG_714=Raw
FWPLG_715=Allow only Trusted IP List
FWPLG_717=In
FWPLG_718=Out
FWPLG_719=Allow All
FWPLG_720=Allow Trusted
FWPLG_721=Ask
FWPLG_722=Hide uninstalled application rules
FWPLG_723=Application was successfully added, however it is not visible due to the current filter.
FWPLG_724=Rule Based
FWPLG_725=Child Connect
FWPLG_726=PC Tools recommends untrusted profiles for insecure networks.
FWPLG_727=Select a trust level for this network
FWPLG_728=New Network Detected
FWPLG_729=Changing setting to "Allow All" disables stealth mode. Are you sure you want to proceed?
FWPLG_730=Raw protocol cannot change to other protocols in pop-ups.
FWPLG_731=Port Override
FWPLG_732=IP Protocols
FWPLG_733=Non-IP Protocols
FWPLG_734=Trusted IP List
FWPLG_735=You have requested to switch user modes from Expert to Normal. There are some rules which do not exist in Normal mode and as a result these rules will be disabled.#\#r#\#n#\#r#\#n Are you sure you want to proceed?
FWPLG_736=Failed to make profiles or applications compliant. User mode will remain expert.
FWPLG_737=Local Area Network
FWPLG_738=DHCP Server
FWPLG_739=DNS Server
FWPLG_740=Gateway
FWPLG_741=Custom
FWPLG_742=IP Address
FWPLG_743=IP Range
FWPLG_744=IP Mask
FWPLG_745=IPv6 Address
FWPLG_746=IPv6 Range
FWPLG_747=IPv6 Mask
FWPLG_748=You have made changes to trusted IPs list. Would you like to apply these changes now?
FWPLG_749=Invalid IP Address
FWPLG_750=Start Address
FWPLG_751=End Address/Mask
FWPLG_752=Port Number
FWPLG_753=End port must be higher than start port
FWPLG_754=You have made changes to blocking IP protocols list. Would you like to apply the changes now?
FWPLG_755=Value
FWPLG_756=You have made changes to blocking non-IP protocols list. Would you like to apply the changes now?
FWPLG_757=You have made changes to the port override list. Would you like to apply these changes now?
FWPLG_758=Networks
FWPLG_759=Local Network Range
FWPLG_760=Connection Status
FWPLG_761=Last Connected
FWPLG_762=Gateway MAC
FWPLG_763=Prompt on new network detection
FWPLG_764=Default profile for new networks
FWPLG_765=Active
FWPLG_766=Inactive
FWPLG_767=Preferences
FWPLG_768=Allows you to configure general settings of the user interface and the Firewall user mode.
FWPLG_769=Firewall Mode
FWPLG_770=Auto
FWPLG_771=Block All
FWPLG_772=Allow all network traffic (disable Firewall)
FWPLG_773=Automatically create rule for non-malware application on first run (Recommended)
FWPLG_774=Ask user to create rule for non-malware application on first run
FWPLG_775=Block all traffic network (Panic mode)
FWPLG_776=The connections with the following IP ranges will be allowed by the firewall.
FWPLG_777=The connections with the following ports or port ranges will be allowed by the firewall.
FWPLG_778=Please select the IP protocols that you want to block.
FWPLG_779=Please select the non-IP protocols that you want to block.
FWPLG_780=User mode switch request
FWPLG_781=where the remote IP is equal to my address
FWPLG_782=Profiles
FWPLG_783=Intrusion Prevention
FWPLG_784=Trusted IP
FWPOP3= POP3 - used for retrieving E-mails. (TCP)
FWPOP3OverSSL= POP3 over SSL. (TCP)
FWPopUpBinaryChange=%s binaries have changed. This may have occurred because you upgraded or changed the application.
FWPopUpConnectDesc=%s is trying to access the internet.
FWPopUpListenDesc=%s is trying to act as a server and accept incoming connections.
FWPopUpOleDesc=%s is trying to use automation to control other applications.
FWPopUpRawport0Desc=%s is trying to act as a server and accept any incoming connections. This will open all TCP/UDP ports of the firewall.
FWPopUpRegistry=%s is attempting to modify an important registry setting.
FWPopUpWindowsHook=%s is attempting to monitor and/or intercept system events.
FWPopUpWindowsHookApp=%s is attempting to monitor and/or intercept %s events.
